三溴偶氮胂催化光度法测定痕量铁

本文研究了硫酸介质中痕量 Fe(Ⅲ)催化加速抗坏血酸、溴酸钾和三溴偶氮胂之间的褪色反应及动力学条件,建立了动力学光度法测定痕量Fe(Ⅲ)的新方法.方法灵敏度为1.82×10~(-12)g·ml~(-1).测定范围为Fe(Ⅲ)0～30ng/25ml.已用于人发和食品中痕量铁的测定.结果满意.     

科学仪器工作状态监测装置的设计与实现

建立了支持网络通讯的科学仪器工作状态监测装置。该检测装置以单片机系统为核心,运用信号检测技术获取仪器的工作状态信息,实现有效机时的记录。基于自制编码表对数据进行BASE64编码,保证了记录信息的安全;支持嵌入式互联网技术将被监测仪器的实时状态上传到远程服务器,实现大型科学仪器的网络化监测。     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

水热合成CdS纳米晶体的形貌控制研究

研究了水热合成CdS纳米晶体形貌的化学控制，选择不同的络合试剂为模板,研究其对水热合成CdS纳米晶体形貌的影响.实验发现若以络合试剂乙二胺、甲胺为模板时，产品CdS晶体的形貌分别为（20～30） nm×（200～600） nm和（40～50） nm×（200～600） nm尺寸的纳米棒;而以络合试剂吡啶、 氨为模板时，产品CdS晶体的形貌分别为平均尺寸约30 nm和20 nm的纳米颗粒.用XRD、TEM、XPS、PL和Raman光谱等技术对所得CdS纳米棒进行了表征.同时对水热合成CdS纳米晶体形貌的模板控制机制进行了探讨，提出了一种水热合成CdS纳米棒的络合物结构诱导生长机理.     

甲胺化反应催化剂稀土改性丝光沸石的研究

研究了稀土改性丝光沸石催化剂对常压固定床上甲胺化反应的活性及选择性的影响，结果表明，以钇改性丝光沸石催化剂的活性及对二甲胺的选择性最佳。催化剂表征结果表明，稀土改性丝光沸石主要是引起丝光沸石中Ｂ酸中心发生变化，而对丝光沸石的晶体结构及表面硅铝原子比基本不产生影响。稀土改性能增强催化剂的热稳定性，延长催化剂的寿命。     

Microcalorimetric investigation of the growth of the <Emphasis Type="Italic">Escherichia coli</Emphasis> DH5α in different antibiotics

The effects of Amoxicillin Sodium and Cefuroxime Sodium on the growth of E. coli DH5α were investigated by microcalorimetry. The metabolic power-time curves of E. coli DH5α growth were determined by using a TAM air isothermal microcalorimeter at 37°C. By evaluation of the obtained parameters, such as growth rate constants (k), inhibitory ratio (I), the maximum heat power (P _m) and the time of the maximum heat power (t _m), one found that the inhibitory activity of Amoxicillin Sodium vs. E. coli DH5α is enhanced with the increasing of the Amoxicillin Sodium concentration, and the Cefuroxime Sodium has a stimulatory effect on the E. coli DH5α growth when the concentration is about 1 μg mL⁻¹. The IC₅₀ for the Amoxicillin Sodium and the Cefuroxime Sodium are 1.6 and 2.0 μg mL⁻¹, respectively, it implicates that the E. coli DH5α is more sensitive to Amoxicillin Sodium than Cefuroxime Sodium.     

Synthesis of alpha-MoTe2 nanorods via annealing Te-seeded amorphous MoTe2 particles

Semiconductor alpha-MoTe2 nanorods have been synthesized by annealing Te-seeded particles of an amorphous MoTe2 intermediate. This intermediate is prepared by a solution reaction between Mo(CO)6 and elemental Te in diphenylmethane. The as-synthesized products were characterized by structural, compositional, and morphological techniques of X-ray diffraction, selected area electron diffraction, selected area energy dispersive spectroscopy, energy dispersive X-ray analysis, X-ray photoelectron spectroscopy, transmission electron microscopy, and high-resolution transmission electron microscopy. The results of the annealing process are MoTe2 nanorods with diameters of 50-200 nm and lengths ranging from 0.1 to 3.0 microm. Here, the rodlike structure of MoTe2 is reported for the first time, and added to the list as one kind of new morphology of MoTe2 nanomaterials. A mechanism for the formation of the nanorods is proposed. The sandwich-layered structure of Te-Mo-Te and the similarity in the structure between hexagonal alpha-MoTe2 and hexagonal Te are responsible for the formation of nanorods of MoTe2.     

羧酸铜催化反应的研究——Ⅰ.羧酸铜催化醛肟转变为睛

本文报道了在多种羧酸铜催化下,醛肟在含有氰基的溶剂中(如CH_3CN、CH_3OCH_2CH_2CN等),均可脱水转变成相应的腈。反应条件温和,产率较高。具有不同空间和电性效应取代基的羧酸铜对反应的产率影响不大。实验中还发现溶剂乙腈参与了上述反应。     

Sesquiterpenoids from the Rhizome of Ligularia virgaurea

Two novel sesquiterpene dimers, compounds 1 and 2 , were isolated from the rhizome of Ligularia virgaurea, together with the six known sesquiterpenoids 3 – 8 . Their structures were established by physico‐chemical and spectroscopic methods, especially by means of 1D‐ and 2D‐NMR as well as HR‐MS analyses. A mechanism based on a classical Diels–Alder cyclization is proposed for the formation of the dimer 1 from the precursors 8 and the quinone form of 6 (Scheme).     

甲基丙烯酸羟烷基酯与丙烯腈或丙烯酰胺共聚合的研究

测定了亲水性甲基丙烯酸羟烷基酯如HEMA、MHPMA分别与AN或AAM,在60℃不同溶剂中自由基聚合反应的竞聚率。AN(M_1)-HEMA(M_2)共单体,在DMSO或DMF溶剂以AIBN或KPS-IPA引发剂条件下共聚,用Kelen-Tüds法计算的竞聚率变化不大,r_1=0.22-0.25、r_2=0.97-1.05,说明在此均相溶液共聚中,所用的溶剂及引发剂对竞聚率的影响较小,这两种单体能很好共聚。但AAM-MHPMA或AAM-HEMA共单体时,r_1与r_2值相差很大,如前者r_1=0.0433、r_2=3.98,后者r_1=0.0535、r_2=1.89,说明不易共聚,共聚物中主要是MHPMA或HEMA组分。